abc banner

Four Post Wood Frame Waterbed Assembly Instructions

Replacement Wooden Frame Hardside Waterbed Mattresses Softside Waterbed Mattresses in Complete Sets & Parts Traditional Waterbed Mattress Sheet Sets Traditional Waterbed Mattress Pads & Bedding Blue Magic Waterbed Mattress Accessories, Heaters & Parts Waterbed Mattress & Furniture Information Go to the Shopping Cart Contact ABC Waterbed

4 Post Frame

positioning
 

Lay out your frame, posts and hardware.

laying it out  

Mount the footboard to the two shorter posts using the hardware provided which is usually brackets and screws. Normally there are predrilled holes to facilitate attaching the brackets.

laying it out  

Mount the headboard to the two taller posts using the hardware provided.

headboard  

Mount each side frame board to the headboard and footboard. Make sure the finished edges of the frame boards face correctly.

sides  

Position the assembled frame where you want it in the room.

positioning  

The Pedestal is basically a box that sits on the floor to provide support for the mattress.

Layout the pieces of your pedestal inside the frame.

positioning
 

Slide the plastic corner brackets into each corner of the pedestal base. Slide the corner bracket in at an angle to start, for easier assembly.

Firm pressure is usually required to slide the corner brackets on. Do not use a hammer.

brackets  

Assemble the two sets of the center support system by inserting the slotted pieces into each other. Position the two sets of center supports in the center of the bed head to foot and side to side.

Alternately you may receive a single long support with two shorter supports. Position it down the middle of the pedestal base.

brackets  

Finish the pedestal inside the frame by positioning it in the middle. The finished pedestal sides when assembled will face outside. These are usually painted black.

positioning


Place the decking on top of the pedestal riser between the 4 boards of the frame.

positioning  

Attach the brackets on each side between the decking and the frame.

positioning